Техническая литература

8930 кн. Подписаться на жанр

Сортировать по:

дате добавления

названию

году выхода

количеству скачиваний

Low Energy Cooling for Sustainable...

Ursula Eicker

Low Energy Cooling for Sustainable Buildings

This long-awaited reference guide provides a complete overview of low energy cooling systems for buildings, covering a wide range of existing and emerging sustainable energy technologies in one comprehensive volume. An excellent data source on cooling performance, such as building loads or solar thermal chiller efficiencies, it is essential reading for building services and renewable energy engineers and researchers covering sustainable design. The book is unique in including a large set of...

Автор

Ursula Eicker

Modeling and Design Techniques for...

Arvind Raghavan

Modeling and Design Techniques for RF Power Amplifiers

Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of...

Автор

Arvind Raghavan

Reliability and Statistics in Geote...

Gregory Baecher B.

Reliability and Statistics in Geotechnical Engineering

Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modeling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems. The resulting engineering models are used to make probabilistic predictions, which are applied to geotechnical problems. Reliability & Statistics in Geotechnical Engineering comprehensively covers the subject of...

Автор

Gregory Baecher B.

Handbook of Industrial Water Solubl...

Peter Williams A.

Handbook of Industrial Water Soluble Polymers

Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food...

Автор

Peter Williams A.

Dow's Fire and Explosion Index Haza...

American Institute of Chemical Engineers (AIChE)

Dow's Fire and Explosion Index Hazard Classification Guide

This popular safety best-seller is designed to help the user quantify the expected damage of potential fire and explosion incidents in realistic terms, identify the equipment likely to contribute to the creation or escalation of an incident, and communicate the fire and explosion risk potential to management. Based on Dow's Fire and Explosion Risk Analysis Program, the index provides a step-by-step, objective evaluation of the actual fire and explosion, as well as reactivity potential of process...

Автор

American Institute of Chemical Engineers (AIChE)

Charge Transport in Disordered Soli...

Sergei Baranovski

Charge Transport in Disordered Solids with Applications in Electronics

The field of charge conduction in disordered materials is a rapidly evolving area owing to current and potential applications of these materials in various electronic devices This text aims to cover conduction in disordered solids from fundamental physical principles and theories, through practical material development with an emphasis on applications in all areas of electronic materials. International group of contributors Presents basic physical concepts developed in this field in recent years...

Автор

Sergei Baranovski

Fundamentals of Liquid Crystal Devi...

Shin-tson Wu

Fundamentals of Liquid Crystal Devices

From laptop computers and mobile phones to digital cinema, Liquid Crystal Displays (LCDs) are integral components in an increasing array of highly desirable consumer electronics and communication devices, and are already the predominant technology used in flat panel displays. This inter-disciplinary book is intended as an introductory guide to the fundamental properties of liquid crystals and their applications in display and photonic devices, providing a basic understanding of the physics,...

Автор

Shin-tson Wu

Nanoscale Calibration Standards and...

Ludger Koenders

Nanoscale Calibration Standards and Methods

The quantitative determination of the properties of micro- and nanostructures is essential in research and development. It is also a prerequisite in process control and quality assurance in industry. The knowledge of the geometrical dimensions of structures in most cases is the base, to which other physical and chemical properties are linked. Quantitative measurements require reliable and stable instruments, suitable measurement procedures as well as appropriate calibration artefacts and...

Автор

Ludger Koenders

Control of Continuous Linear System...

Kaddour Najim

Control of Continuous Linear Systems

This book contains more than 150 problems and solutions on the control of linear continuous systems. The main definitions and theoretical tools are summarized at the beginning of each chapter, after which the reader is guided through the problems and how to solve them. The author provides coverage of the ideas behind the developments of the main PID tuning techniques, as well as presenting the proof of the Routh–Hurwitz stability criterion and giving some new results dealing with the design of...

Автор

Kaddour Najim

Microbial Hazard Identification in...

Jennylynd James

Microbial Hazard Identification in Fresh Fruits and Vegetables

Keeping produce safe–from the farm to the fork As health- and quality-conscious consumers increasingly seek out fresh fruit and vegetables, participants in the food supply chain–growers, shippers, processors, and retailers–must be ever more effective in safeguarding their products and protecting consumers. Microbial Hazard Identification in Fresh Fruits and Vegetables is a comprehensive guide for the fresh fruit and vegetable industry to understanding and controlling the hazards that can affect...

Автор

Jennylynd James

Innovation in Small Professional Pr...

Martin Sexton

Innovation in Small Professional Practices in the Built Environment

From the book’s Foreword by Trevor Mole, Managing Director, Property Tectonics; President of the European Association of Building Surveyors and Construction Experts: ‘Shu-Ling and Martin have built on their research work and that of others to produce an understandable and readable insight into innovation in small professional service firms. They have successfully unravelled the complex behavioural and organisational forces taking place and created a framework to help practitioners understand the...

Автор

Martin Sexton

10th Annual Conference on Composite...

William Smothers J.

10th Annual Conference on Composites and Advanced Ceramic Materials

This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Автор

William Smothers J.

Finite-Elemente-Methoden im Stahlba...

Rolf Kindmann

Finite-Elemente-Methoden im Stahlbau

The Finite Element Method (FEM) has become a standard tool used in everyday work by structural engineers having to analyse virtually any type of structure. After a short introduction into the methodolgy, the book concentrates on the calculation of internal forces, deformations, ideal buckling loads and vibration modes of steel structures. Beyond linear structural analysis, the authors focus on various important stability cases such as flexural buckling, lateral torsional buckling and plate...

Автор

Rolf Kindmann

Radio Wave Propagation in the Marin...

Alexander Kukushkin

Radio Wave Propagation in the Marine Boundary Layer

Based on his many years of professional experience at leading companies in communications technology, the author describes an analytical solution for wave propagation over the sea surface in an atmospheric boundary layer. His approach allows the detailed analysis of combined effects of diffraction, refraction and scattering in random media. While specific applications covered are targeted at radio wave propagation over the sea surface, a similar approach is applicable to many problems in...

Автор

Alexander Kukushkin

Guidelines for Evaluating the Chara...

CCPS (Center for Chemical Process Safety)

Guidelines for Evaluating the Characteristics of Vapor Cloud Explosions, Flash Fires, and BLEVEs

The serious consequences of vapor cloud explosions, flash fires, and BLEVEs are very well known. Better understanding of the characteristics of these phenomena and models to calculate their consequences are key to effective prevention and mitigation. Cited by EPA in its 1996 document, "Off-site Consequence Analysis Guidance, " the first half of the book describes the characteristics of these phenomena and gives an overview of past experimental and theoretical research and methods to estimate...

Автор

CCPS (Center for Chemical Process Safety)

Ultimate Limit State Analysis and D...

Jeom Paik Kee

Ultimate Limit State Analysis and Design of Plated Structures

Reviews and describes both the fundamental and practical design procedures for the ultimate limit state design of ductile steel plated structures The new edition of this well-established reference reviews and describes both fundamentals and practical design procedures for steel plated structures. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Furthermore,...

Автор

Jeom Paik Kee

Life Cycle Assessment of Energy Sys...

Nicholas Sakellariou

Life Cycle Assessment of Energy Systems

Energy and sustainability are two of the most important and often most misunderstood subjects in our world today. As these two subjects have grown in importance over the last few decades, interest in the Life Cycle Assessment (LCA) model has grown as well, as a potentially crucial tool in understanding and striving towards sustainability in energy systems. Not just wind and solar systems, but all energy systems, need to be understood through this model. Wind and solar power have the potential to...

Автор

Nicholas Sakellariou

Practical Methods for Biocatalysis...

John Whittall

Practical Methods for Biocatalysis and Biotransformations

Biocatalysts are increasingly used by chemists engaged in fine chemical synthesis within both industry and academia. Today, there exists a huge choice of high-tech enzymes and whole cell biocatalysts, which add enormously to the repertoire of synthetic possibilities. Practical Methods for Biocatalysis and Biotransformations is a “how-to” guide focussing on commercially available enzymes and strains of microorganisms that are readily obtained from culture collections. The source of starting...

Автор

John Whittall

Developments in Block Copolymer Sci...

Ian Hamley W.

Developments in Block Copolymer Science and Technology

Focuses on recent advances in research on block copolymers, covering chemistry (synthesis), physics (phase behaviors, rheology, modeling), and applications (melts and solutions). Written by a team of internationally respected scientists from industry and academia, this text compiles and reviews the expanse of research that has taken place over the last five years into one accessible resource. Ian Hamley is the world-leading scientist in the field of block copolymer research Presents the recent...

Автор

Ian Hamley W.

Fatigue Life Analyses of Welded Str...

Tom Lassen

Fatigue Life Analyses of Welded Structures

Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks...

Автор

Tom Lassen

Processing of Nanoparticle Structur...

Tom Hinklin

Processing of Nanoparticle Structures and Composites

This volume features papers from the Controlled Processing of Nanoparticle Structures and Composites symposia held during the 2008 Materials Science and Technology conference (MS&T08). It provides a useful one-stop resource for understanding the most important issues in controlled processing of nanoparticle structures and composites. Logically organized and carefully selected articles give insight into controlled processing of nanoparticle structures and composites, covering topics such as...

Автор

Tom Hinklin

Advances in Ceramic Matrix Composit...

Mrityunjay Singh

Advances in Ceramic Matrix Composites VIII

Ceramic composites are leading candidate materials for high-temperature structural applications. This new book updates readers on the latest in state-of-the-art ceramic composite processing and fabrication methods, process modeling, processing-microstructure-property relationships, mechanical behavior, and characterization. Many of the most important aspects necessary for the understanding and further development of ceramic composites is covered in this volume. It will be of great interest to...

Автор

Mrityunjay Singh

Technology, Manufacturing and Grid...

Guangyu Wang

Technology, Manufacturing and Grid Connection of Photovoltaic Solar Cells

A unique guide to the most important technical aspects of photovoltaic power generation with comprehensive analysis and author industry-experience Unique from other books in the area in that it explains profound theories in simple language, introduces widely used production equipment and processes for industry professionals, and explains the complete PV industry chain from material to power generation Has originated from the author’s practical industry experience, enabling the use of up-to-date...

Автор

Guangyu Wang

LTE, The UMTS Long Term Evolution

Stefania Sesia

LTE, The UMTS Long Term Evolution

Where this book is exceptional is that the reader will not just learn how LTE works but why it works. —Adrian Scrase, ETSI Vice-President, International Partnership Projects LTE – The UMTS Long Term Evolution: From Theory to Practice provides the reader with a comprehensive system-level understanding of LTE, built on explanations of the theories which underlie it. The book is the product of a collaborative effort of key experts representing a wide range of companies actively participating in the...

Автор

Stefania Sesia

←
1
2
...
310
311
312
313
314
315
316
...
372
373
→
стр.

Для правообладателей и по всем вопросам knigism.info@yandex.ru